35
Cleaning the Optical Unit
A dirty optical unit may cause images to be distorted. Wipe the optical unit with a soft dry
cloth.
Use a soft dry cloth to clean the optical unit. Do not use water or neutral detergent.
Cleaning the Rollers
To remove paper dust from the rollers, move the scanner on a commercially available
adhesive sheet for cleaning printers.
Disconnecting the Scanner from the Computer
Disconnect this scanner from the USB connector of the computer.
Carrying or Storing the Scanner
Put the scanner in the carrying case supplied with it when carrying or storing it.
Performing Calibration
If the scanner is unable to scan images in detail, is connected to another computer, or the
scanner driver is reinstalled, perform calibration.
Press the scan button or perform scanning from an application to display the driver screen.
Click the Calibrate button and scan the calibration sheet.
Notes
05_Scanner (34-49) 8/15/01, 8:40 AM35
To Next Page
Loading...
Need help?
General