Operation
Adjusting the brightness and contrast
BRIGHTNESS/CONTRAST
Brightness
Contrast
Black Level
ACR
Auto Brightness
Lighting Guide
Auto Level
75
50
50
Off
Off
Off
► Press the button to open th e BRIGHTNESS/CONTRAST setting
window.
► Press the
/ or / button to make the desired setting.
► Press the
button to save the settings and close the menu.
Function Description
Brightness
Set the brightness o f the display
With this function you change the brightness of the backgroun d lighting.
Contrast
Set the contrast of the display
With this function you mod ify the contrast of bright colour tones.
If the contrast is set too high, bright surfaces can no longer be distinguished
from very bright surfaces. If the contrast is set too low, the maximum
brightness will not be achieved.
Please note that, if you chan ge this setting, correct colour representation
can then no longer b e assured.
Black level
Setting the black level of the display
With this function you modify the contrast of dark colour tones.
Please note that, if you chan ge this setting, correct colour representation
can then no longer b e assured.
36 Fujitsu
To Next Page
Loading...
