Operation
Displaying information
► Press the button t o call up the main menu.
► Press the
button to call up the Information w indow.
Details such as the model designation, serial number, resolution, H/V
frequency and ECO mode are displayed.
Activate/deactivate ECO o perating mode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
The ECO mode can only be activated when the Auto Brightness function is deactivated.
► Press the
buttontos
witch ECO operating mode on or off.
The message ECO Mode on or ECO Mode off is displayed.
If ECO mode is activ
e, a brightness is used that is the optimum from both
the e rgono mic and
ecological aspects.
If the brightnes
s is furt her reduced by the user, this new setting is used during
the next call of t
he ECO operat ing mode.
After the ECO op
erating mode is sw itched off, the brightness previously set by the user is restored.
Selecting the input signal
INPUT
HDMI1
HDMI2
DisplayPort
USB-C
30 Fujitsu
To Next Page
Loading...
