Operation
Using the Daisy Chain function
With the daisy chain function, you can conne ct up to four monitors in sequence to a display port
output on your graphics card. The maximum possible number of monitors depe nds on the resolution:
Screen resolution Maximum
1920x1080 (FHD)
1920x1200 (WUXGA)
4 monitors
2560x1440 (QHD)
3440x1440 (UWQHD)
2 monitors
Ensure that your graph
ics card supports DP 1.2 or the USB-C port supports "Displayport
Alternate Mode" befo
re a ctivating the daisy chain function. Failing this, it is possible
that your graphics ca
rd may no longer recognise the monitor.
The maximum possib
le number of monitors can be limited by the graphics
card used or by the g
raphics card drivers used, as well as by their settings
(e.g. display refr
esh rate, colour depth).
DP1.2
► Connect up the graphics card to the "DP IN" po rt or to the USB-C port
(underside) on the first monitor.
► In eac
h case, connect the next monitor to the "DP OUT" po rt.
Fujitsu 39
To Next Page
Loading...
