Fujitsu P34-9 UE - Notes about the KVM Function

Notes about the KVM function
Notes about the KVM function
Your monitor has a KVM function. This involves the two USB ports designated as "Upstream"
being switched over in response to the selected input signal.
Input signal USB-Upstream
HDMI1/HDMI2 USB-B
Display port
USB-B
USB-C USB-C
This enables you to switch or ‘swap’ betw een any pe ripherals connected to the monitor
and the integrated network port between two computers.
► F or more convenient switching betwee n two computers, press a nd hold down the key
until the progress bar for the Swap Inputs function (switch between inputs) has reached 100%.
The monitor switches between USB-C and the oth er input signal, i.e. the one used most recently.
Swap Inputs
If data carr
iers are connected to the monitor, it is advisable before changing the input
signal to di
sable the Remove hardware safely function to prevent the loss of data.
The Swap Inputs function is only ena bled if a computer is connected to both
of the USB ports designated as "Upstream".
48 Fujitsu