Notes on All-in -O ne operation
Notes on All-in-One operation
The functions described here can only be assured in combination with s elected
FUJITSU Notebooks, Tablets and PCs that have a native USB-C connection with
integrated display port support (e.g. ESPRIMO G, LIF EBOO K, STYLISTIC).
The following three functions govern All-in-One operation.
• Continuous power supply for the system via the monitor
• Switching the PC on and
off using the On/O ff switch on the monitor
• System status displayed by the s tatus LED on the monitor
Ensure that your system has the very latest BIOS version.
For further information about opening the "BIOS" settings, please
consult the handbook for your system.
ESPRIMO G
To use All-in-One operation to its full extent, perform the following settings:
Power Settings
Power Failure Recovery
USB Power
Wake-Up Resources
External Power Button Control
LAN
Wake On LAN boot
USB Keyboard
Wake Up Timer
Main Advanced Security Power Event Logs Boot Save & Exit
[Always On]
[Always On]
[Enabled]
[Disabled]
[Best Sequence]
[Enabled]
[Disabled]
► In th
e B IO S settings on your PC, open the Power header where you the n set
USB p
ower to Always O n and USB Keyboard to Enabled.
Fujitsu 49
To Next Page
Loading...
