Operation
To be able to use the Daisy C hain function, this must be enabled in the OSD.
MENU
Image
OSD
Advanced
Information
ADVANCED
Presence Sensor
Proximity
Daisy Chain
Overdrive
DDC/CI
Factory Recall
Off
On
Off
On
50
► Press the button to call up the main menu.
► Press the butt
on three times and then
to switch to the Advanced submenu.
► Press the
button to highlight the Daisy Chain function.
► Press the
button to apply the On setting.
► Press the
button to save the settings and re turn to the main m enu.
When enabling or disabling th e daisy-chain function in the OSD, t he
power supply v ia USB-C is interrupted briefly!
As soon as the daisy-chain function is active, automatic detection of
other signal source s (e.g. HDMI) is disabled.
The speed of data transmission is reduced on USB-C from USB 3.1 Gen1
(upto5Gbit/s)toUSB2.0(upto480Mbit/s).
► Press the butt on To change the input signal manually.
If switched to an input signal that does not support a daisy chain, the daisy
chain function is disabled automatically.
40 Fujitsu
To Next Page
Loading...
