CX400 M4 Disassembly and Recycling Instructions
Contents
1 Disassembly and recycling . . . . . . . . . . . . . . . . . . . 7
1.1 Recycling information . . . . . . . . . . . . . . . . . . . . . . 7
1.2 Disassembly of the server enclosure . . . . . . . . . . . . . . 9
1.2.1 Removing server nodes from the server enclosure . . . . . . . . 9
1.2.2 Removing the ID card and server cover . . . . . . . . . . . . . 12
1.2.3 Removing the hot-plug PSU . . . . . . . . . . . . . . . . . . . 16
1.2.4 Removing fan modules . . . . . . . . . . . . . . . . . . . . . 17
1.2.5 Removing the fan cage . . . . . . . . . . . . . . . . . . . . . 19
1.2.6 Removing the midplane kit . . . . . . . . . . . . . . . . . . . 20
1.2.7 Removing 2.5-inch HDD/SSD modules . . . . . . . . . . . . . 22
1.2.8 Removing 2.5-inch HDD backplanes . . . . . . . . . . . . . . 24
1.2.9 Removing the HDD/SSD bridge board . . . . . . . . . . . . . 25
1.2.10 Removing front bezels . . . . . . . . . . . . . . . . . . . . . . 26
1.2.11 Removing the front panel modules . . . . . . . . . . . . . . . 28
1.3 Disassembly of the server nodes . . . . . . . . . . . . . . . 30
1.3.1 Removing the SXM2 extension tray, SXM2 modules and LC kit 30
1.3.2 Removing the GPGPU extension tray and GPGPUs . . . . . . 42
1.3.3 Removing riser modules and expansion cards . . . . . . . . . 49
1.3.4 Removing an FBU . . . . . . . . . . . . . . . . . . . . . . . . 54
1.3.5 Removing an OCP mezzanine card . . . . . . . . . . . . . . . 56
1.3.6 Removing main memory modules . . . . . . . . . . . . . . . . 57
1.3.7 Removing the heat sink and CPU (Air cooling) . . . . . . . . . 59
1.3.8 Removing the heat sink and CPU (LC) . . . . . . . . . . . . . 61
1.3.9 Removing the iRMC microSD card . . . . . . . . . . . . . . . 69
1.3.10 Removing M.2 SSDs . . . . . . . . . . . . . . . . . . . . . . 69
1.3.11 Removing the Dual microSD 64GB Enterprise . . . . . . . . . 70
1.3.12 Removing the TPM and system board . . . . . . . . . . . . . 72
1.3.13 Removing the battery . . . . . . . . . . . . . . . . . . . . . . 76