Fujitsu PRIMERGY RX200 S3 Service Supplement

RX200 S3 Service Supplement
Contents
1 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1 Overview of the documentation . . . . . . . . . . . . . . . . . . 5
1.2 Notational conventions . . . . . . . . . . . . . . . . . . . . . . 7
2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . 11
4 Replacing components . . . . . . . . . . . . . . . . . . . . 17
4.1 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.2 Pulling out / removing the server . . . . . . . . . . . . . . . . 17
4.3 Opening/closing the server . . . . . . . . . . . . . . . . . . . 19
4.4 Replacing the control panel kit . . . . . . . . . . . . . . . . . 20
4.5 Replacing the chassis ID / temperature sensor . . . . . . . . . 21
4.6 Replacing the fan backplane . . . . . . . . . . . . . . . . . . 22
4.7 Replacing the SAS backplane for 3.5-inch drives . . . . . . . . 23
4.8 Replacing the SAS backplane for 2.5-inch drives . . . . . . . . 24
4.9 Replacing the power-sharing board (power backplane) . . . . . 25
4.10 Replacing the system board . . . . . . . . . . . . . . . . . . . 27
5 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
5.1 Control panel board (LED board) . . . . . . . . . . . . . . . . 29
5.2 Backplanes for SAS drives . . . . . . . . . . . . . . . . . . . 30
5.2.1 SAS backplane for 3.5-inch drives . . . . . . . . . . . . . . . 30
5.2.2 SAS backplane for 2.5-inch drives . . . . . . . . . . . . . . . 31
5.3 Fan backplane . . . . . . . . . . . . . . . . . . . . . . . . . . 32
5.4 Power-sharing board . . . . . . . . . . . . . . . . . . . . . . 33
6 Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
6.1 Cable overview . . . . . . . . . . . . . . . . . . . . . . . . . 35
6.2 Cable layout . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Fujitsu PRIMERGY RX200 S3 Specifications

General

Number of Processors	2
Storage	Up to 6 x 3.5" SAS/SATA HDD
RAID Support	RAID 0, 1
Network	Dual Gigabit Ethernet
Form Factor	1U Rack
Power Supply	Hot-plug redundant power supply