18 Service Supplement RX200 S4
Preparation Replacement routines
© cognitas. Gesellschft für Technik-Dokumentation mbH 2008 Pfad: J:\RX200S4\Doku\Suppl\EN\rx200s4-ss-en.k04
Ê If the pulled-out server is difficult to access in the rack, remove it completely
from the rack. If you do not want to remove the server, skip this page.
V CAUTION!
The server has no cable management in the rack!
Therefore you must unplug all cables connected to server before you
remove it.
V CAUTION!
At least two people are needed to remove the server from the
rack.
Figure 3: Removing the server from the rack
Ê Press in the safety springs (1) on both sides, and carefully pull the server
further toward you (2).
Ê Pull the server out of the rails and place it on a table, for example.
COMPACT
High Speed
COMPACT
High Speed
CS
S
1
2
To Next Page
Loading...
