Fujitsu Primergy RX200 S4 - Opening;Closing the Server; Removing the Air Duct

RX200 S4 Service Supplement 19
Replacement routines Preparation
4.1.2 Opening/closing the server
Figure 4: Removing the housing cover
Ê To take off the housing cover, press the button (1).
Ê Slide the cover about 1 cm backward (2) and lift it off.
4.1.3 Removing the air duct
Figure 5: Removing the air duct
Ê Lift up the air duct and take it out.
COMPACT
High Speed
COMPACT
High Speed
C
SS
1
2