EasyManua.ls Logo

Fujitsu PRIMERGY RX200 S6 - 1.2 Documentation overview

Fujitsu PRIMERGY RX200 S6
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12 Options Guide RX200 S6
Preface
1.3 Expansions and conversions
Main memory
The system board offers 12 slots for memory modules. 6 memory slots can be
used in mono processor configurations.
Second processor
The system board can be upgraded with a second processor. Only processors
of the same type may be used on the system board. The second processor must
have the same clock frequency as the first.
Accessible drive
In the version with a maximum of six HDD modules, a 5.25 inch bay is available
for a DVD drive (SATA interface) with a height of 0.5 inches.
HDD modules
The server can accommodate two further HDD modules instead of the DVD
drive. To do this, you must install a conversion kit consisting of an additional
HDD cage and a HDD backplane for up to 8 HDD modules.
I The conversion kit is only available for the EMEA market.
Expansion cards in the PCI Express slots
The system board offers two slots with a PCI Express x8 interface and one slot
with a PCI Express x4 interface (exclusively for modular RAID controllers):
Expansion cards can only be installed using three-slot riser cards. The riser
cards provide three slots at a right angle to the system board (two slots for PCIe
controllers and one slot for a RAID controller).
Intelligent Battery Backup Unit
You can add an iBBU (intelligent Battery Backup Unit) to the optional modular
RAID controller to ensure data integrity in the event of a power failure.

Other manuals for Fujitsu PRIMERGY RX200 S6

Related product manuals