RX200 S6 Options Guide 47
8 HDD modules
V CAUTION!
● Before installing/removing an HDD module to/from the server, turn off
the server, all peripheral devices, and any other connected devices.
Also unplug all power cords from the power outlet. Failure to do so
can cause electric shock.
● When installing an HDD module, hold it by the side. Applying force to
the top may cause failures.
● Do not touch the circuitry on boards and soldered parts. Hold the
metallic areas or the edge of the circuit boards.
● The circuit boards and soldered parts of internal options are exposed
and can be damaged by static electricity. Before handling them, first
touch a metal part on the server to discharge static electricity from
your body.
● Follow the safety instructions in the chapter "Safety instructions" on
page 17.
To Next Page
Loading...
