Fujitsu PRIMERGY RX200 S6 - 5.2 Switching the server on and off

RX200 S6 Options Guide 71
Further options
10.2 USB Flash Module (UFM)
The server can be equipped with a USB Flash Module (UFM).
Figure 41: UFM installation kit
Ê Open the server as described in the chapter "Preparation" on page 25.
Ê Lift the required riser card holder with riser card #3 upward and remove it.
1 USB Flash Module (UFM) 3 UFM spacer
2 UFM nylon screw
0
1
2