36 Options Guide RX200 S6
Processors
6.1 Installing a second processor
The system board can be upgraded with a second processor. The upgrade kit
consists of a processor and a heat sink.
V CAUTION!
Only processors of the same type may be used on the system board.
That means the number of the internal processor cores as well as the
primary clock and the FSB frequency have to be the same. For dual
operation, use a suitable multiprocessor operating system.
Ê Open the server as described in the chapter "Preparation" on page 25.
Ê Remove the air duct as described in the section "Removing the air duct" on
page 29.
Figure 8: Opening the processor holder and removing the socket cover
Ê Press the spring clip downward and outward.
Ê Fold back the spring clip (1).
Ê Fold back the processor holder (2).
Ê Hold the socket cover by the two grips between your thumb and index finger
and lift it vertically upward (3).
1
2
3
To Next Page
Loading...
