Fujitsu PRIMERGY RX200 S6 - 4.2 Installing;removing the server in;from the rack

RX200 S6 Options Guide 45
Accessible drive
Figure 15: Connecting the DVD cable
Ê Connect the white connector of the DVD cable to the corresponding
connector on the HDD backplane (see arrow).
Ê Connect the small black connector of the DVD cable to the connector SATA
ODD on the system board (see the cabling plans in the Appendix).
Figure 16: Position of the pins in the mounting frame and the openings on the DVD drive
Ê Insert the DVD drive into the mounting frame so that the plastic pins (1) on
both sides of the mounting frame are inserted into the openings (2) on the
outsides of the drive.
1
2