RX600 S6 Service Supplement 11
Introduction
Information about the system board:
– Features of the system board
– Board layout
– Jumper settings
– LED displays
– Replacing the battery
Technical Manual
Extensions and upgrades
I For some components only the installation
routine is described in the Options Guide.
Removing these components proceed in
reverse order.
– Extending/replacing the main memory
– Installing another processor / replacing a
processor / replacing a heat sink
– Installing accessible drives
– Installing a ServerView Local Service Display
– Installing controllers (incl. I/O riser card) in non-
hot-plug PCI slots
– Installing UFM
– Installing TPM
– Installing a battery (iBBU)
Options Guide
Cabling
BIOS setup BIOS Setup
Information/procedure Manual
Table 1: Overview of the documentation for PRIMERGY RX600 S6
To Next Page
Loading...
