RX600 S6 Service Supplement 51
Replacement routines
4.14 Replacing the UFM
UFM is the short form for USB Flash Module.
Ê Open the server as described in section "Opening the server" on page 21
Ê Remove the I/O riser card, see the Options Guide.
Figure 30: Removing the nylon screw of the UFM
Ê Remove the nylon screw of the defective UFM (see arrow in figure above).
Ê Disconnect and remove the defective UFM.
The UFM spacer remains on the system board.
To Next Page
Loading...
