50 Service Supplement RX600 S6
Replacement routines
Figure 29: Installing the TPM
Ê Insert the new TPM on the system board (1).
Ê Fasten the TPM with the special screw for the TPM (2).
Please use the TPM bit insert to tighten the special screw.
V CAUTION!
Do not fasten the screw too firmly. Stop as soon as the head of the
screw lightly touches the TPM board.
Ê Close the server as described in section "Closing the server" on page 22.
/
0
To Next Page
Loading...
