RX600 S6 Service Supplement 49
Replacement routines
Ê Remove the TPM screw using a thin slotted screwdriver (e.g. watchmaker's
screwdriver).
Ê Remove the defective TPM from the upper side of the system board.
V CAUTION!
Ensure to turn the screw clockwise in order to remove it! Otherwise the
thin metal bar may break, rendering it impossible to unscrew the screw.
Figure 28: Attaching TPM bit insert
Ê Attach the TPM bit insert provided with the spare kit to a bit screwdriver.
Ê Reinstall the system board (see "Installing the new system board" on
page 44).
To Next Page
Loading...
