RX600 S6 Service Supplement 23
Replacement routines
If you have removed the server from the rack cabinet, please refer to the
"PRIMERGY RX600 S6 Server Options Guide" for a detailed installation
description.
Figure 4: Sliding the server into the rack
Ê Pull up on the locking latch on both telescopic rails (1).
Ê Slide the server into the rack until it snaps into place (2).
Ê Connect all cables on the rear side of the server.
Ê Connect all AC power cords to the power outlets.
Ê Press the on/off button to start up the server.
To Next Page
Loading...
