Fujitsu PRIMERGY ServerView BX900 - Page 21

Telnet Interface Management Agent
ServerView BX900 Management Blade 21
3.3.4.2 Server Blade Information
This option displays some information on the server blade parameters. The following parameters are included:
3.3.4.3 Server Blade CPU
This option displays some information on the server blade CPU parameters. The following parameters are
included:
Server Power Force Power Off
Enabled
Controls the "forced" shutdown (termination of processes is not waited
for; these are closed immediately).
Server Power Force Power Off Control If the "proper" shutdown of the server blade fails, the "forced shutdown"
is initiated after n minutes.
BIOS Recovery Flash Bit This option can be selected if the server blade’s BIOS has problems or
a flash has failed. After the option has been set, the blade can be started
up "without" the BIOS. It then searches autonomously for a suitable
BIOS on the connected media (floppy, USB stick, CD/DVD) and flashes
it.
iRMC Address Configuration Sets up the LAN connection of the iRMC.
Parameter Description
Server Blade Status Displays the server blade health status.
Server Blade Manufacture Displays the server blade manufacturer.
Server Blade Manufacture Date Displays the server blade production date.
Server Blade Serial Number Displays the server blade serial number (systems).
Server Blade Identify Serial Number Displays the server blade serial number (motherboard).
Server Blade Product Name Displays the server blade product name.
Server Blade Product Version Displays the server blade product version.
Server Blade Model Name Displays the server blade model name.
Server Blade Hardware Version Displays the server blade hardware version.
Server Blade BIOS Version Displays the server blade BIOS version.
Number of CPU Socket Displays how many CPU sockets are available on the server blade.
Number of Memory Socket Displays server blade memory information.
Server Blade OS Type Displays the OS platform currently running on the server blade.
Server Blade OS Version Displays the version of the OS currently running on the server blade.
Server Blade iRMC Firmware Version Displays the server blade iRMC firmware version.
Server Blade Mezzanine Card Displays whether a Mezzanine card is installed.
Parameter Description
CPU Type Displays the CPU type.
CPU Frequency Displays the CPU frequency.
CPU ID Displays the CPU ID.
Parameter Description