Chapter 5 Daily Care
Appendix
Glossary
Introduction
Index
Contents
TOP
76
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Daily Care
Operational
Settings
Brake roller (× 2)
Remove the roller from the scanner.
For details about removing the brake roller, refer to "6.2 Replacing the
Brake Roller" (page 82).
Gently wipe along the grooves, taking care not to damage the roller
surface.
Pick roller (× 2)
Gently wipe along the grooves as you rotate the roller manually, taking
care not to damage the roller surface. Make sure that it is cleaned
properly because residue on the roller will affect the feeding
performance.
Plastic idler roller (× 4)
Gently wipe the surface of the rollers. Make sure that it is cleaned
properly because residue on the roller will affect the feeding
performance. Also be careful not to damage the sponge which is
attached on each roller.
Glass (× 2)
Gently wipe the dirt and dust off the surface of the glass sections.
ATTENTION
Make sure that the cloth does not get caught and damage the
document sensors.
ATTENTION
Vertical streaks may appear on the scanned image when the glass is
dirty.
To Next Page
Loading...
Need help?
General