Fujitsu ScanSnap S500 User Manual

4.1 Using ScanSnap Manager
ScanSnap S500 Operator's Guide 111
Various settings according to your needs
4
ATTENTION
The [Continue Scanning] button may not be displayed on the window and an
error message like the example below may appear. In this case, it is not possi-
ble to resume scanning. You will use Adobe Acrobat if you want to merge two
divided image files; this operation is only available for files of PDF format.
The following shows the procedures for this operation:
1. Confirm the last page scanned on the "Message" window.
2. Click the [Quit] button, then the following window appears.
3. Click the [No] button to save the image (PDF file) scanned before the
interruption (this file is called "File A").
4. Scan the remaining documents (this part is called "File B").
5. Open "File A" with Adobe Acrobat.
6. From the menu bar, select [Document] - [Insert Pages].

Fujitsu ScanSnap S500 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum system requirements	Windows 2000/ XP/ Vista
Scan media weight	52 - 127 g/m²
Power requirements	AC 100V - 240V, 50 / 60 Hz
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	2700 g