Fujitsu ScanSnap S500 User Manual

4
■ Operation Button
■ Rear Side
SCAN
POWER
[SCAN] button
Press this button to start the scanning.
[POWER] button
Turns on/off the power supply.
Power lamp
Indicates the scanner status.
Blue (Solid): Ready
Blue (Blinking): Scanning
Orange (Solid): Error
Light off: Power off
Seal (inform you that the installation of the software has to be
performed first)
After installing the software, remove this seal.
USB connector
AC adapter connector

Fujitsu ScanSnap S500 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum system requirements	Windows 2000/ XP/ Vista
Scan media weight	52 - 127 g/m²
Power requirements	AC 100V - 240V, 50 / 60 Hz
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	2700 g