4.1 Using ScanSnap Manager
ScanSnap S500 Operator's Guide 115
Various settings according to your needs
4
6. Press the [SCAN] button .
⇒ Scanning starts.
⇒ In step 3, if the checkbox for "Use a fixed password" is cleared, the following screen
appears.
In the "Password" and "Confirm" fields, enter the same password, and click the [OK]
button.
⇒ The scanned document is saved as a password-protected PDF file.
HINT
• You can use the following characters to set your password.
Maximum number of characters: 16
Characters: A-Z, a-z, 0-9
Symbols: ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ~
• If you click the [Cancel] button, the PDF file is saved without a password.
• Note: If you forget your password, the PDF file cannot be opened.
• If the operating system you are using is Window 98 or Window Me, this func-
tion is enabled only if Adobe Acrobat is installed on your computer.
To Next Page
Loading...
