EasyManuals Logo

Fujitsu ScanSnap S500 User Manual

Fujitsu ScanSnap S500
201 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
38
Also, pay attention to the following when you use the Carrier Sheet.
ATTENTION
Use only the Carrier Sheet for ScanSnap.
Avoid writing, coloring, staining or cutting the black and white pattern part of
the Carrier Sheet. Otherwise, the scanner cannot recognize the Carrier Sheet
correctly.
Load the Carrier Sheet one by one on the scanner.
Do not place the Carrier Sheet upside-down on the scanner. Otherwise, a
paper jam may happen, or the Carrier Sheet may be damaged.
Do not leave a document on the Carrier Sheet for a long period of time. The
ink may be transferred onto the Carrier Sheet.
Do not leave the Carrier Sheet in high-temperature places such as a place fac-
ing direct sunlight or near a heating apparatus for a long period of time. Also,
do not use the Carrier Sheet under a high-temperature environment. Other-
wise, it may warp.
Do not bend, twist, or pull the Carrier Sheet forcibly.
Do not use a damaged Carrier Sheet. Otherwise, the scanner may be
damaged or malfunction.
To avoid warping the Carrier Sheet, keep it in a horizontal place where it is not
weighed down, if possible.
Do not rub the edge of the Carrier Sheet with your finger. Otherwise, your fin-
ger may get cut.
If you scan multiple small-size materials such as the picture and post card
using Carrier Sheet at one time, a paper jam may occur. It is recommended to
put such materials in Carrier Sheet one-by-one for scanning.
If a paper jam occurs frequently, feed about 50 sheets of PPC paper or recy-
cled paper, and then scan the document by using Carrier Sheet.
* You can use either unused or used PPC/recycled paper.

Table of Contents

Other manuals for Fujitsu ScanSnap S500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu ScanSnap S500 and is the answer not in the manual?

Fujitsu ScanSnap S500 Specifications

General IconGeneral
Film scanningNo
Color scanningYes
Input color depth- bit
Maximum scan size216 x 356 mm
Scanner typeSheet-fed scanner
Sensor typeCCD
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Maximum ISO A-series paper sizeA4
Auto document feeder (ADF) input capacity50 sheets
USB version2.0
Standard interfacesUSB 2.0
Minimum system requirementsWindows 2000/ XP/ Vista
Scan media weight52 - 127 g/m²
Power requirementsAC 100V - 240V, 50 / 60 Hz
Sustainability certificatesENERGY STAR
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
CertificationRoHS
Weight and Dimensions IconWeight and Dimensions
Weight2700 g

Related product manuals