Fujitsu ScanSnap S500 User Manual

3.4 Changing Scan Settings
ScanSnap S500 Operator's Guide 55
Basic Scanner Operations
3
<Setting items>
The following describes each setting on the "Scan and Save settings" window.
[Setting when left-clicked]
Select a scan setting profile.
• Standard
• CardMinder
• Searchable PDF (OCRs during scan)
■ The [Add Profile] button
You can add new profile settings selectable to the "Setting when left-clicked" menu for
selection.
■ The [Edit Profile] button
You can change profile names or delete them from the "Setting when left-clicked" menu
excepting "Standard" profile.
HINT
You can register scan setting profiles.
Registered setting profiles are added to the "Setting when left-clicked" drop-
down menu.
For details on how to register a profile, refer to "3.5 Saving Scan Settings"
(page 77).

Fujitsu ScanSnap S500 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum system requirements	Windows 2000/ XP/ Vista
Scan media weight	52 - 127 g/m²
Power requirements	AC 100V - 240V, 50 / 60 Hz
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	2700 g