4.2 Changing Scanning Settings
ScanSnap S510 Operator's Guide 85
Setting the ScanSnap
4
■ [Option] button
This function is used for configuring detailed settings of PDF files. This button is
enabled when "PDF(*.pdf)" is specified at [File format:]. Click [Option] button to
display the following dialog box.
• "Multipage PDF (whole batch in one PDF)"
Creates a merged PDF file of all the scanned images.
• "Generate one PDF file per xx pages"
Create a new PDF file at each set page. For example, when "2" pages are set in
this option, scanning 6 pages of documents creates 3 files.
■ Set a password for PDF file
You can set a password for a PDF file created after scanning. It becomes impossible
to open a password-protected file if you do not enter the password for that file.
The "Enter password" dialog box appears whenever the scanning finishes. Enter a
password two times (one is for confirmation), and then click the [OK] button.
*If you click the [Cancel] button, the file is saved as a normal PDF file
without a password.
ATTENTION
If you select Adobe Acrobat and Adobe Reader (or Acrobat Reader) at
"Application," only the first file is displayed in the dialog box when two or more
files are created by one scanning. (If you select other applications, follow the
specifications of the application to find out how the files are displayed.)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
