Fujitsu ScanSnap S510

4.3 Saving Scanning Settings
ScanSnap S510 Operator's Guide 95
Setting the ScanSnap
4
⇒ Now, you have finished adding a new profile.
HINT
• You can add up to 12 profiles, including the "Standard" profile.
(The "Standard" profile cannot be deleted.)
• You can change the sequence of the profiles except for the "Standard" profile.
1. Right-click the ScanSnap Manager icon, and then select [Profile
Management] to open the "Profile Management" window.
2. Select a profile name from the list to arrange profiles in a different
sequence.
3. Click the [Up] or [Down] button to move the profile name up or down.
4. Click the [Close] button.