Fujitsu ScanSnap S510 User Manual

112
(2) The ScanSnap always interacts with an application that is running and has
higher priority (when more than one application is running).
When ScanSnap Organizer or CardMinder is running, an application selected in the
"Application" drop-down list on the [Application] tab of the "ScanSnap Manager - Scan and
Save Settings" dialog box is automatically switched to the running application (when more
than one application is running, an application that has higher priority is selected). When
you scan documents scanned document images are opened with the selected application.
Even if the ScanSnap is in Quick Menu Mode, the ScanSnap Quick Menu will not appear
after scanning. Be aware that scanned document images are opened with the selected
application.
The ScanSnap interacts with the application until you exit the application.
When more than one application is running, CardMinder has highest priority, and Rack2
Library lowest.
When the ScanSnap is in Left-Click Mode, the interacting application name on the Left-
Click Menu is followed by "is interacting."
When ScanSnap Organizer is interacting with the ScanSnap

Fujitsu ScanSnap S510 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum storage drive space	512 MB
Minimum system requirements	Windows 2000/ XP/ Vista
Sustainability certificates	ENERGY STAR
Power requirements	AC 100V to 240V, 50 / 60 Hz
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	2700 g