154
Print options
You can change settings as follows:
Copies
You can specify the number of copies you want to print.
Select a number between 1 and 99.
Scaling down
You can select an output size of images; you can fit output images to paper
size or print them in original size.
Same size:
Images are printed in their original sizes.
Scale down to paper size:
Images larger than a paper size are scaled down to the paper size so that the
whole image can be printed on a sheet of paper.
"Allow automatic rotation" checkbox
Images are rotated according to the length-to-width ratio of images so that
they can be printed in either portrait orientation or landscape orientation,
whichever best fits.
"Center the image and print" checkbox
Images are centered and printed.
"Keep data used for printing as files" checkbox
Printed document images are saved in PDF format.
PDF files are saved in a folder specified under the "Image saving folder" field on
the [Save] tab of the "ScanSnap Manager - Scan and Save Settings" dialog box
(page 74).
"Do not show this dialog again" checkbox
This dialog box does not appear again. Step 7 will be skipped.
[OK] button
Clicking this button prints images using settings configured in this dialog box.
[Cancel] button
Clicking this button cancels printing.
[Help] button
You can view Help topics related to the Print dialog box.
⇒ Printing is performed.
ATTENTION
• While the "Scan2Print - Print" dialog box is open, the ScanSnap does not work
even if you press the [SCAN] button. Close the "Scan2Print - Print" dialog box
before scanning another document.
• Do not move, delete, or rename files when the "Scan2Print - Print" dialog box
is displayed.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
