Fujitsu ScanSnap S510 User Manual

6.1 Using ScanSnap Manager
ScanSnap S510 Operator's Guide 189
Using the ScanSnap in Various Ways
6
■ Merging scanned images divided by scanning errors into one PDF
file
When you are scanning documents and saving them in PDF format, the following window appears
if the scanning is interrupted by a paper jam or error.
You can resume or abort the scanning by the following procedure.
<To resume scanning>
Operation
1. Check the last scanned page in the "Message" window.
2. Load the not-yet scanned pages on ADF.
3. Click the [Continue Scanning] button to restart the scanning.
<To quit scanning>
Operation
1. Click the [Quit] button.
⇒ The following window appears.

Fujitsu ScanSnap S510 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum storage drive space	512 MB
Minimum system requirements	Windows 2000/ XP/ Vista
Sustainability certificates	ENERGY STAR
Power requirements	AC 100V to 240V, 50 / 60 Hz
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	2700 g