Fujitsu ScanSnap S510

3.3 Loading Documents
ScanSnap S510 Operator's Guide 53
Using the ScanSnap
3
To "Create facing pages in one image"
Use this mode for scanning a document larger than A4 size such as A3 and B4 sizes.
Fold the document in half, scan it in duplex scanning mode, and then merge both front and back
side images to make a double-page spread image.
(You can also merge both front and back side images of a document smaller than A4 size to output
a double-page spread image.)
Operation
1. Right-click the ScanSnap Manager icon on the task bar, and select "SCAN
Button Settings."
2. On the [Paper Size] tab, click the "Carrier Sheet Settings" button.
S
S