Working with the Tablet PC
Calibrating the pen
Before using the pen for the first time, you should calibrate it so that the cursor follows the
movements of the pen as accurately as possible. You should also always repea t the calibration
if the co-ordination between the pen and cursor movement deteriorates.
Operating system Menu
Windows 7
To calibrate, call up the Hardware and Sound / Tablet PC Settings function
in the Control Panel. You ne ed to calibrate both portrait and landscape
formats.
Changing the pen tip
With use, the pen tip may become worn or may pick up foreign particles that can scratch the screen.
A damaged or w orn tip may not move f reely, causing unpredictable results when using the pen.
If these problems appear with your pen, you should change the pen tip.
► Pull the pen tip from the pen.
► Replace the pen tip with one of the
replacement tips that we re supplied
your pen. Insert the pointed end o f the
pen tip into the barrel and push it in
gently until it is in place.
Do not con tinue to use a tip which is worn or damaged.
Fujitsu Technology Solutions 35