Working with the Tablet PC
Using the power-management features
PowerPowerBattery
The Tablet PC uses less power when the power management features are enabled. You will
then be able to work longer when using the battery before having to recharge it.
Power efficiency is increased and e nvironmental pollution reduced. By
choosing the best power options, y ou can make significa nt savings a nd
at the same time help protect the environment.
We recommend the following settings:
Function On external power On ba ttery power
Turn off monitor After 10 minutes After 5 minutes
Turn off hard disk(s) After 15 minutes After 10 minutes
Energy saving (S3) After 20 minutes After 15 minutes
Hibernate m ode (S4
)
After 1 hour After 3 0 minutes
► Select the power man
agement functions in your Control Panel.
► Select the Scree n Saver in your Control Panel.
or
► Keep a finger pressed on the desktop. Configure the screensaver under Personalization -
Change screensaver.
If you ne ed further information about an option, you can get help with most settings by
pressing the
?
symbol in the upper right of the screen to o pen the Microsoft Help.
When the Tablet PC is in p ow er saving mode, you m u s t remember the fo llowing:
During powe r saving mode, open files are held in the main memory
orinaswapfile on the hard disk.
Never switch off the Tablet PC while it is in a power saving mode. If the built-in battery is
nearly flat, close the open files and do not go into power saving mode.
If you do not intend to use your Tablet PC for a long perio d of t ime:
► Exit the power saving mode if necessary via touching the screen or by switching on the
Tablet PC.
► Close all opened programs and completely shut down the Tablet PC.
Fujitsu Technology Solutions 43
To Next Page
Loading...
