Troublesho ot ing and tips
The Tablet PC stops working
TheTabletPCEnergy savingm ode
Cause Troub leshooting
The Tablet PC is in energy saving mode.
► Leave energy saving mode.
An application programme has cau sed the
malfunction.
► Close th e application progr
am or restart
the Tablet PC (by restarting
the operating
system or switching the devi
ce off and back
on again).
The battery is dead.
► C harge the battery.
or
► Insert a charged batter
y.
or
► Connect the mains adapter to the Tablet
PC.
The printer does n ot print
Printerdoe s notp
rint
Cause Troub leshooting
The printer is not switched on. ► M ake sure that the printer is switched
on and ready for operation (refer to the
documentation supplied w ith the printer).
The printer is not connected correctly.
► Check t hat the data cable connecting
the Table PC to the printer is properly
connected.
The printer driver is fa ulty or not correctly
installed, or it is the wrong printer driver.
► Check t hat the data cable connecting
the Tablet PC to the printer i s properly
connected.
► Check whether the correct printer driver is
loaded ( refer to the printer docum entation).
The radio connection to a network does not work
Theradi
oconnect i ontoane tworkdoes notwork
Cause Troub leshooting
The wireless component is disabled.
► Switch the radio component on (see
"
Switch ing the wirele ss components on and
off", Page 47).
The wireless component is enabled. Despite
this, the wireless connection to a network doe s
not work.
► Check whether the radio c onnection is
switched on via the software.
► Furt her information on using the radio
component can be found in t he help fi les.
Fujitsu Technology Solutions 71