Connecting external devices
Connecting external devices
Under all circumstances, please observe the safety notes provided in the
"
Important n otes", Page 11 chapter before connecting or d isconnecting
any devices to or from your Tablet PC.
Always read the documentation supplied w ith the device you wish to connect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
Adhere to the order described below when you connect external devices
to the Tablet PC or separate them from it:
With some devices, such as USB devices, it is not necessary to switch off
the Tablet PC and the device before connecting/disconnecting. For more
information about whether or not devices need to be switched off, please refer
to the documentation supplied with the extern al device.
Some of the extern al devices require special drivers (see the o perating
system and external device documenta tion).
Connecting devic es to the Tablet PC
1. Switch off the Tablet PC and all external devices.
2. Remove the m ai
ns plug for the Tablet PC and all relevant devices from the sockets.
3. Connect the cables for your external devices following the instructions.
4. Plug all powe
r cables into the mains sockets.
DevicesPerip heralde
vices
Disconnecting devices from the Tablet PC
1. Switch off the Tablet PC and all external devices.
2. Remove the
mains plug for the Tablet PC and all relevant devices from the sockets.
3. Disconnect the cables for your external devices following the instructions.
DevicesPerip heraldevices
60 Fujitsu Technology Solutions