Fujitsu UTB-GCA User Manual

33
5. OPERATION
SETTING METHOD
5-2. OPERATION / STOP
5-2-1. To start operation
Enter the control mode to select the central control
number (the indoor units) to start its operation.
Refer to “3-3. CONTROL MODE” for information
about control modes.
Press
ON OFF
and will light up. The setting is
applied to the indoor units associated with the se-
lected central control number. Because of the
change of the setting, LED
SET
will come on.
It is necessary to transmit the newly set information
to the relevant indoor units. Refer to steps 4, 5 and
notes of “3-3. CONTROL MODE” for details.
CHECK
ACL
MASTER
ENERGY ANTI
LOUVERLOUVER
FAN
TIMER
SET
TIMER
DELETE
TIMER
DAY
CLOCK
ADJUST
DAY OFF
TEMP.
MEMORY
OPERATION
MEMORY
TEST
SET
CENTRAL
DELETE
BACK
GROUP
ZONE
ON OFF
TIME
CONTROL
CONTROL
FILTER
RESET
CONTROL
FREEZE
COPY
TIMER
MODE
SAVE
SETTING SETTING

Fujitsu UTB-GCA Specifications

General

Brand	Fujitsu
Model	UTB-GCA
Category	Controller
Language	English