49
5. OPERATION
SETTING METHOD
5-8-4. To cancel horizontal airflow swing operation
Enter the control mode to select the central control
number (the indoor units) whose horizontal airflow
swing operation needs to be cancelled.
Refer to “3-3. CONTROL MODE” for information
about control modes.
Press for 2 seconds or more and the
shown in the display will change to the .
It is necessary to transmit the newly set information
to the relevant indoor units. Refer to steps 4, 5 and
notes of “3-3. CONTROL MODE” for details.
About Horizontal Airflow Swing Operation
• The swing range can be adjusted with the remote controller’s HORIZONTAL AIR FLOW DIREC-
TION SET button.
• The SWING operation may stop temporarily when the air conditioner’s fan is not operating, or is
operating at very low speeds.
To Next Page
Loading...
