47
5. OPERATION
SETTING METHOD
5-8-2. To cancel the vertical airflow swing operation
Enter the control mode to select the central control
number (the indoor units) whose vertical airflow
swing operation is to be cancelled.
Press for 2 seconds or more and the
shown in the display will change to the . The
flaps will return to the positions from which the
swing operation started out.
It is necessary to transmit the newly set information
to the relevant indoor units. Refer to steps 4, 5 and
notes of “3-3. CONTROL MODE” for details.
About Vertical Airflow Swing Operation
• The swing range can be adjusted with the remote controller’s VERTICAL AIR FLOW DIRECTION
SET button.
• The SWING operation may stop temporarily when the air conditioner’s fan is not operating, or is
operating at very low speeds.
• During use of the Cooling mode, do not set the air UP / DOWN direction flap, in the 4 position
(shown in page 45) for a long period of time, since water vapor may condense near the outlet port
and drops of water may drip from the air conditioner.
To Next Page
Loading...
