34
5. OPERATION
SETTING METHOD
5-2-2. To stop operation
Enter the control mode to select the central control
number (the indoor units) to stop its operation.
Refer to “3-3. CONTROL MODE” for information
about control modes.
Press
ON OFF
and will light up. The setting is
applied to the indoor units associated with the se-
lected central control number. Because of the
change of the setting, LED
SET
will come on.
It is necessary to transmit the newly set information
to the relevant indoor units. Refer to steps 4, 5 and
notes of “3-3. CONTROL MODE” for details.
To Next Page
Loading...
Need help?
General
