57
6. TIMER SETTING
METHOD
Press
TIMER
MODE
until the segments of the ap-
pear on the display. Each time the button is pressed,
the timer function changes in the following order.
Press
TIME
to adjust the off time.
▲: Press to advance time.
▼: Press to reverse time.
Once the timer time has been changed, press
TIMER
SET
to confirm the setting.
It is necessary to transmit the newly set information to the relevant indoor units.
Refer to steps 4, 5 and notes of “3-3. CONTROL MODE” for details.
Notes • To change the set time during operation.
Perform steps 1 → 3
• To change the timer mode during operation.
Perform steps 1 → 2
• To cancel the timer operation.
Press the
TIMER
MODE
and set the display to in step 2 (the indoor units will switch to non stop
operation).
• To stop operation during use of timer mode.
Following the procedures of “5-2. OPERATION / STOP” to stop the operation of the indoor units.
To Next Page
Loading...
Need help?
General
