59
6. TIMER SETTING
METHOD
It is necessary to transmit the newly set information to the relevant indoor units.
Refer to steps 4, 5 and notes of “3-3. CONTROL MODE” for details.
Notes • To change the set time during operation.
Perform steps 1 → 3
• To change the timer mode during operation.
Perform steps 1 → 2
• To cancel the timer operation.
Press the
TIMER
MODE
and set the display to in step 2 (the indoor units will switch to non stop
operation).
• To stop operation during use of timer mode.
Following the procedures of “5-2. OPERATION / STOP” to stop the operation of the indoor units.
To Next Page
Loading...
