Fukuda FL-286 - Page 25

3
3
ELECTRICAL AND AIR PIPE LINE CONNECTIONS
READY PRESSURE ERROR DETECTION ＊３ READY
REMARKS
ＲＤＹ ＤＬＹ ＣＨＧ ＢＡＬ ＥＸＨ ＲＤＹ
OPTION
＊2
ＤＬＹ
TIMER
0.6sec
ＣＨＧ
TIMER
0.1sec
ＢＡＬ
TIMER
ＤＬＹ
TIMER
*3：Optional pressure switch is necessary to detect pressure error in oblique lined area.
It is valid only when pressure error is not detected at the end of the charge sequence. The oblique lined area shows
the same content as the thin shaded area.
PRES. ERROR DETC.
ＥＸＨ
TIMER
NO P.SW INPUT AT THE EN
D
OF THE CHG SEQUENCE
PRES. ERROR DETC.
PRES. LESS THAN SET
VALUE FOR TEST OR NO
P.SW INPUT AT THE END OF
THE CHG SEQUENCE
OFF
DIF. PRE
S
P.SW