Table 7 - Steam Program for Siemens LMV3*
Pre-selected parameter set: Code
Pre-selected parameter set: Vers.
Manual output Undefined=automatic
mode
Main frequency
0=50hz 1=60hz
Time out for menu operation
Fuel meter: pulse valency [pulses per
volumetric flow unit]
Delete display of error history: to delete
the display, set to1then to2
Operating mode BACS
0=off
1=Modbus
2= reserved
Setback time in the event of
communication breakdown
Device address for Modbus
Baud rate for Modbus
0=9600
1=19200
Parity for Modbus
0=none
1=odd
2=even
Performance standard at interruption of
communication with building automation.
For modulation operation…
0…19.9=burner off
20…100=20…100%burner rating for multi-
stage operation… 0=burner off
invalid=no performance
Operating hours resettable
*Data is for reference purposes only. Fulton Companies is not responsible for this product, including (but not limited to) its accuracy, reliability, and safety. No
Fulton document should substitute for full review of documentation available from the product manufacturer.
+Out of Test Fire
Note: Customer settings should be recorded in the Customer column for reference.