FULTON VSRT-60 - Page 88

APPENDIX - A
Fulton Ltd
Information provided in this document is based on standard boiler configurations. Alternate or custom
configurations may result in deviations. Fulton practices continuous product improvement and reserves
the right to change specifications and/or dimensions without notice.
VSRT-10
Standard Features and
Devices
§ Vertical Tubeless Heat Exchanger
§ Thick wall construction (9.27 mm
minimum)
§ Never needs re-tubing
§ Fully wetted design – no refractory
§ Operating efficiencies up to 86% (Typical
82%)
§ Variable Speed High Pressure
Combustion Air Blower
§ 10.34 barg Maximum Allowable Working
Pressure
§ Stainless steel jacket
§ Fully modulating 4:1 turndown burner
§ Industrial pilot ignition
§ Operating and high pressure limit
switches
§ Two (2) Low Water Cut Off probes with
manual reset
§ Low NOx emissions <20 ppm
§ Media free cyclonic combustion air
intake filter
§ Gas train
§ Safety interlock contacts for external
device
§ Remote boiler enable contacts
§ Emergency-stop contacts
§ Combustion Air Inlet Adapter
§ Safety Relief Valve
Control Options
§ Automatic surface blowdown
(TDS)
§ Control panel with non-fused
disconnect
§ High water protection
§ Boiler alarm package
§ Boiler gauge package
§ Auto bottom blowdown
§ High integrity 1
st
and 2
nd
low
water level limiters
§ Optional modbus interface
(BACS)
§ Optional PC interface
Listings & Compliance
§ CE Marked to PED, EMC and LVD
§ Constructed to BSEN 12953 as standard
Trim Kit Items (Shipped
Loose)
§ Pressure Gauge
§ Installation and Operation Manual
§ Reflex Gauge glass
§ Cyclonic air filter
VSRT-IOMM-2019-1
Page 80