User Manual
15
Configuration
3
3 Configuration
W500 allows IP configuration via the ComPoint Manager and detailed set-
up with a web browser.
3.1 Access to the Web-based
Configuration Program
If you do not wish to use the fixed W500 IP address192.168.0.252, please install
the ComPoint Manager software. You can find it on the product CD or on our
website. ComPoint Manager allows you to localize
W500 within your network
without difficulty and define another IP address suitable for the network. The
use of ComPoint Manager is explained in the documentation for this tool.
The following instructions guide you through the installation of W500 with the
example of its preset IP address.
1. Connect your computer wireless or via a cable to W500. Please set a fixed
IP address on your computer. It must be in the range 192.168.0.X, whereby
"X" must not be 254 or 252. If you wish to establish a wireless connection,
you first have to set the configuration described below in the computer.
– SSID: Funkwerk-ec
– C
HANNEL: 6
– WLAN
SECURITY: disabled
– O
PERATION MODE: AP
– WLAN: ON
2. Open your web browser, in the address field enter the W500 IP address
and press Enter. The
W500 standard address is http://192.168.0.252.
Note
Not all functions of FEC ComPoint Manager are available for W500. The
localization of devices in the network and the IP configuration of FEC devices
are supported. Please note that
W500 is not compatible with the Funkwerk
WLAN management software applications WILMA or WMS.
To Next Page
Loading...
Need help?
General
