Need help?Do you have a question about the Funkwerk W1002 and is the answer not in the manual?
General| Device Type | Wireless Access Point |
|---|---|
| Wireless Standards | IEEE 802.11b/g |
| Frequency Band | 2.4 GHz |
| Security | WEP, WPA, WPA2 |
| Maximum Data Rate | 54 Mbps |
| Antenna | Internal |
| Operating Temperature | 0°C to 40°C |
| Ports | 1x 10/100 Mbps Ethernet |
| Ethernet Ports | 1 |
Instructions for connecting and setting up the device.
Preliminary tasks and basic settings for device configuration.
Step-by-step guide for device setup and physical connections.
Steps for checking and allocating IP addresses on the PC.
Details on assigning IP addresses using DHCP or ComPoint Manager.
Configuration steps for establishing a wireless network.
Steps to reset the device to factory settings and manage configurations.
Presents various methods for accessing and configuring the device.
Details on various tools for device configuration.
Guide to accessing and using the web-based configuration interface.
Displays current system status, activities, and messages.
Management of core system parameters like name, date, time, and passwords.
Procedure for changing the default system password for security.
Defining the operation mode for device interfaces and bridge groups.
Configuring administrative access options for device interfaces.
Configuration settings for user authentication via RADIUS or TACACS+.
Configuring the two Ethernet interfaces separately.
Configuring IP addresses and structuring the local network using VLANs.
Implementing VLANs for segmentation and grouping clients.
Configuring all WLAN modules (WLANx) of the device.
Adjusting radio parameters for wireless modules.
Detailed radio settings for WLAN modules.
Configuring desired wireless networks (SSIDs).
Overview of security modes: WEP, WPA, WPA2.
WPA2 features, including 802.11i and AES encryption.
Restricting WLAN access using ACL Mode or MAC Filter.
Steps for setting up and editing wireless networks (SSIDs).
Configuring and editing bridge links for wireless connectivity.
Overview of configured routes and route creation.
Defining IP routes with extended parameters.
Configuring port forwarding rules for NAT interfaces.
Distributing data traffic across multiple interfaces for increased bandwidth.
Creating and configuring load balancing groups for interfaces.
Setting up Internet access or dialup connections.
Configuring standard Internet connections using PPPoE.
Configuring Internet connections using PPTP for secure tunnels.
Enabling secure VPN connections using IPSec standards.
Setting up and monitoring IPSec peers for VPN tunnels.
Defining and selecting Phase-1 profiles for IPSec tunnel setup.
Defining and selecting Phase-2 profiles for IPSec tunnel setup.
Enabling PPP connections tunneling via UDP using L2TP.
Creating and managing L2TP tunnel profiles.
Setting up encrypted PPTP tunnels for secure data traffic.
Configuring PPTP tunnels for secure Internet connections.
Configuring virtual interfaces for GRE encapsulation.
Setting up and managing GRE tunnels.
Managing security certificates for VPN and other functions.
Overview of the SIF's packet filtering capabilities.
Functionality and purpose of NAT in network security.
How the SIF processes incoming packets and applies filter rules.
Creating and managing firewall policies.
Setting up specific rules for packet filtering.
Configuring Quality of Service for bandwidth management.
Defining address objects for use in firewall rules.
Defining service objects for use in firewall rules.
Configuring DNS settings for name resolution.
To Next Page
