Funkwerk W1002 - Administrative Access; Access

Field Value
The function is disabled by default.
8.4 Administrative Access
In this menu, you can configure the administrative access to the device.
8.4.1 Access
In the Administrative Access -> Access menu, a list of all physical interfaces is shown.
Fig. 46: System Management -> Administrative Access -> Access
For the Ethernet interface you can select the access parameters Telnet, SSH, HTTP, HT-
TPS
, Ping and SNMP.
8 System management Funkwerk Enterprise Communications GmbH
102 bintec W1002/W1002n/W2002/WIx040/WIx065